| Customization: | Available |
|---|---|
| Communication Mode: | Full-Duplex & Half-Duplex |
| Type: | Ethernet Switch |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
L2+ Managed Industrial 8-Port 10/100/1000T + 4-Port 1G/2.5G SFP Ethernet Switch with 1Ch Optical Fiber Bypass
The UTP UF-MIS6408G-FBP is a specialized industrial managed bypass switch featured with 8-port 10/100/1000-T RJ45, 4-port 1G/2.5GBase-X SFP and 1 channel WDM fiber Bypass port. In normal operation, it is a L2+ managed Ethernet switch. It supports ERPS redundant network and the self-recovery mechanism less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. IPv4/IPv6 static routing, DHCP server, robust Layer 2 management and secure functions can help users expand their networks quickly and efficiently. However, when it encounters a power failure or internal malfunction, the bypass function is activated through the integrated bypass optical switching module, which allows the network connections passing through the switch to remain uninterrupted, ensuring that the data can still flow directly between the connected devices, as if the switch were not in the path at all.
UF-MIS6408G-FBP is also the high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 24-58VDC, redundant power design with polarity reverse/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 80°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
The UF-MIS6408G-FBP Series is suitable for a wide range of applications, including industrial networking, intelligent transportation systems (ITS), and utility market applications that require robust performance in harsh environmental conditions.
| Model No. | UF-MIS6408G-FBP | ||
| Interface | Fiber ports | Copper RJ45 ports | |
| 4 | 8 | ||
| Ethernet | 8*10/100/1000Base-T RJ45 4*1000/2500Base-X SFP |
||
| Management port | 1*RJ45 Console port (115200,8,N,1) | ||
| Bypass Features | |||
| Connector type | LC Female Connector | ||
| Bypass Channels | 1 channel single LC | ||
| Optical Switching Time | ≤10 ms, power failure<--->power normal | ||
| Insertion Loss | 1.2 dB (max) | ||
| Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP |
||
| LED Indicators | |||
| P (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | |
| S (System status indicator) | Blinking: device initialization | On: device on normal operation | |
| 1-8 (Copper ports indicators) Green | Off: ports link down | ||
| On: ports link up | |||
| Blinking: data on TX/RX | |||
| 1-8 (Copper speed indicators) Yellow | Off: ports on 10/100M | ||
| On: ports on 1000M | |||
| 9-12 (Fiber ports indicators) Green | Off: ports link down | ||
| On: ports link up | |||
| Blinking: data on TX/RX | |||
| Power parameter | |||
| Input voltage | 24-58V DC, redundant power input | ||
| Input current | 1.2A Max | ||
| Total power consumption | Full loading ≤15W | ||
| Connector | Removable 4-pin terminal block | ||
| Reverse polarity protection | Support | ||
| Over-voltage protection | Support | ||
| Over-current protection | Support | ||
| Layer 2 functions | |||
| Port aggregation | Support GE port aggregation Support 2.5GE aggregation Support static aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group |
||
| Port features | Support IEEE802.3x flow control, Support interface counters, Support port isolation, Port mirroring ( One-to-One, Many-to-One) Support loop detection (Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast) |
||
| Mac-address table management | Support static Mac-address management Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN |
||
| VLAN | Support access mode Support trunk mode Support hybrid mode |
||
| VLAN classification | Mac Based VLAN IP Based VLAN Protocol Based VLAN |
||
| GVRP | Normal mode Fixed mode Forbidden mode |
||
| QinQ | Port-based QinQ VLAN-based QinQ(VLAN-stacking; VLAN-mapping) Flow-based QinQ |
||
| LLDP | LLDP (Link Layer Discovery Protocol) | ||
| Ring network protocol | Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP |
||
| Support G.8032 ERPS protocol,single ring, sub Ring and major ring Recovery time ≤20ms |
|||
| L2 Multicast | |||
| IGMP snooping | Support IGMP snooping | ||
| Group address | Support group address | ||
| Security functions | |||
| ACL | IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL |
||
| QoS | Support QoS Class, remarking Support SP, WRR queue scheduling Ingress port-based rate-limit Egress port-based rate-limit Support policy-based QoS |
||
| 802.1x | Port access control Mac-address access control RADIUS server |
||
| Port-security | Port-security | ||
| IP source guard | IP Port/MAC binding | ||
| ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
| Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
| Management & Maintenance functions | |||
| User Management | Support password protection Support user authorization management |
||
| SNMP | Supporting SNMP V1/V2C/V3 version | ||
| Web Management | Web Management Support HTTP V1.1 Support HTTPS |
||
| CLI management | Console/Telnet command line management | ||
| RMON | Support RMON(Remote Monitoring) alarm | ||
| Firmware upgrade | Firmware upgrade | ||
| Fault Detection | Ping/Traceroute Dying gasp Support optical transceiver DDM function |
||
| Cable detection | Support copper port cable detection | ||
| NTP | Network Time Protocol | ||
| Syslog/Debug | Syslog/Debug Syslog send to three servers |
||
| Configuration import/export | Support FTP/TFTP remote import/export | ||
| Dual partition management | Support dual partition switching | ||
| Application Protocol Functions | |||
| DHCP Snooping | DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 |
||
| DHCP client | Support DHCP client | ||
| Telnet server | Support telnet server | ||
| Telnet client | Support telnet client | ||
| SSH server | Support SSH server | ||
| TACACS | Support TACACS(the terminal access controller accesses the control system) | ||
| sflow | Support network traffic analysis | ||
| TFTP | Support TFTP Client | ||
| Layer 3 functions | |||
| ARP | ARP table aging | ||
| DHCP server | |||
| IPv4 / IPv6 | static routing | ||
| Switching features | |||
| Switching capacity | 36Gbps | ||
| Packet forwarding rate | 53.5Mpps | ||
| MAC address table | 16K | ||
| VLAN | 4K | ||
| Buffer | 12Mbit | ||
| Forwarding delay | <5us | ||
| Jumbo Frame | Support 10Kbytes | ||
| MDX/MIDX | Support | ||
| Watchdog | Support | ||
| Mechanical structure | |||
| Case protection | IP40 | ||
| Installation method | Din-rail | ||
| Dimension(W*D*H)mm | 54*115*158mm | ||
| Weight | 1.20 kg | ||
| Operating environment | |||
| Operating temperature | -40ºC~+80ºC | ||
| Storage/transportation temperature | -40ºC~+85ºC | ||
| Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
||
| Industrial Standard | |||
| EMS | Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us) Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m EFT:IEC 61000-4-4 4K/2K CS:IEC 61000-4-6 10V ESD:IEC 61000-4-2 Contact: 8K;Air: 15K |
||
| EMI | FCC Part 15B Class A | ||
| Shock | IEC 60068-2-27 | ||
| Free fall | IEC 60068-2-32 | ||
| Vibration | IEC 60068-2-6 | ||
| Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
| MTBF | >200,000 hours | ||
| Warranty | 5 years | ||
| Model | Description |
| UF-MIS6408G-FBP | L2+ Managed industrial Bypass switch with 8*10/100/1000Base-T RJ45 ports, 4*1G/2.5GBase-X SFP slots and 1 channel single fiber bypass port, DC24-58V input, redundant dual power supply, Din-rail installation. Operation temperature: -40ºC~+80ºC |
| SFP Options | SFP option. Please select your SFP on our SFP Options Page (Industrial SFP). |
| SFP module is to be purchased separately. | |
| Mounting Options | Default DIN-Rail Bracket installed. |
| Power Options | DIN-Rail Power Supply. Open Wire for Terminal Block. |
| Power Supply is to be purchased separately. |
){kind=link}