| Customization: | Available |
|---|---|
| Communication Mode: | Full-Duplex & Half-Duplex |
| Type: | Ethernet Switch |
|
Still deciding? Get samples of US$ 239/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Physical Port | |
| RJ45 port and speed | 8x10/100/1000BASE-T 802.3at PoE |
| Fiber port and speed | 2x100/1000BASE-X SFP (Dual Mode, Auto Detection) |
| Console | 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) |
| Parameters | |
| Ethernet standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1ad Q-in-Q VLAN stacking IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP ITU G.8032 ERPS Ring RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 |
| Packet buffer | 4Mbits |
| Packet length | Up to 10K Bytes |
| MAC address table | 8K |
| Transmission mode | Store and Forward (full/half duplex mode) |
| Switch Fabric | 24Gbps/non-blocking |
| Exchange property | Delay time: < 7ps Backplane bandwidth: 20Gbps Packet forwarding rate: 14.88Mpps |
| PoE | |
| PoE Standard | 8 x IEEE 802.3af /IEEE 802.3at PoE |
| Power budget | Max. PoE output power budget 30W |
| Power Pin Assignment | Only support 1/2(+), 3/6(-) |
| PoE Output Power | Output PoE power for singe port≤30W |
| Up to 240-watt PoE budget (48VDC), 120-watt PoE budget (12VDC), 80-watt PoE budget (12VDC) | |
| LED Indicator | |
| PWR (Green) | Power indicator |
| 1-8(Link/Act)/ (Orange) | Network indicator |
| 9-10(Link/Act)/ (Green) | Fiber indicator |
| PoE (Green) | POE indicator |
| Power Information | |
| Power access mode | Phoenix terminal |
| Redundant power input | DC 12-48V |
| Overload protection | Yes |
| Power reverse | Support |
| Power consumption | Full-load<15W (Not use PoE) |
| Physical Property | |
| Protection grade | IP40 aluminum case |
| Cooling mode | Natural cooling, no fan design |
| Dimensions | 165mm x 120mm x 52mm (L x W x H) |
| Installation mode | DIN trail/wall-mountable |
| Weight | 800g |
| Working Environment | |
| Operating Temperature | -40ºC~80ºC |
| Operating Humidity | 5%~90% non-condensing |
| Storage Temperature | -40ºC~80ºC |
| Warranty | |
| MTBF | 500,000 hours |
| Defects Liability Period | 5-year warranty, lifetime technical support |
| Certification Standard | |
| EMI | FCC Part15 Subpart B Class A, EN 55022 Class A |
| EMS | EN61000-4-2(ESD), EN61000-4-3(RS), EN61000-4-4(EFT), EN61000-4-5(Surge), EN61000-4-6(CS), EN61000-4-8, EN61000-4-11 |
| Collision | IEC60068-2-27 |
| Drop | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety grade | EN60950-1 |
| Software | |
| Port | Support IEEE802.3x flow control (full duplex Support for broadcast storm suppression based on port rate Support speed limit for incoming and offline message traffic, with a minimum particle size of 64Kbps Support port temperature protection settings Support port EEE green Ethernet energy saving configuration |
| PoE Management | Support total power limit configuration for POE power supply Support PoE output power allocation per port, close / start af/at Support PoE output priority configuration per port Support PoE work status per port display Support power delay start Support PoE work and time scheduling |
| Layer 3 Function | L2+ network management function Support IPV4/IPV6 management Support layer 3 soft routing (weak three tier) forwarding Support different network segments, communication between different VLAN Support static routing / default routing 128, 1024 ARP software forwarding |
| VLAN | Support port based VLAN (4K), IEEE802.1q Support protocol based VLAN Support Voice VLAN Support for MAC address-based VLANs Support Access, Trunk, Hybrid three types of port configuration Support QinQ configuration |
| Port Aggregation | Support LACP Support static polymerization Support the largest 8 aggregation groups, each aggregation group supports 8 ports |
| Spanning Tree | Support STP (IEEE802.1d) Support STPRSTP (IEEE802.1w) Support STP MSTP (IEEE802.1s) |
| Industrial Ring Network Protocol | Support G.8032 (ERPS), support 255 loops at most, and supports 1024 devices per ring. The self-healing time of the ring network is less than 20ms |
| Multicast | Support IGMP Snooping V1/V2 and support 1024 multicast groups at most Support the user's quick departure mechanism Support MLD Snooping V1/V2 Support multicast VLAN |
| Mirror | Bi-directional traffic mirroring supporting the basic port |
| QoS | Support Diff-Serv QoS Each port supports 8 output queues Support 802.1p/DSCP priority mapping Support queue scheduling mechanism (SP, WRR, SP+WRR) Support priority tag Mark/Remark Support stream-based packet filtering Support for stream-based redirection Support flow-based speed limit |
| ACL | Support L2 to L4 packet filtering function, can match the first 80 bytes of the message, provide based on the source MAC address, destination MAC address, source IP address, destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, VLAN and other definition ACL. Support ACL based on port and VLAN |
| Safety Characteristics | Support user grading management and password protection Support IEEE802.1X authentication / centralized MAC address authentication Support AAA&RADIUS authentication Support the number of MAC address learning restrictions Support MAC address black hole Support SSH 2.0 to provide secure passwords for user login Support SSL to ensure data transmission security Support port isolation Support the speed limit function of ARP message Support IP source address protection Support ARP intrusion detection function Support against DoS attacks Support port broadcast message suppression Support host data backup mechanism Binding capabilities of IP+MAC+VLAN+ ports |
| DHCP | Support DHCP Client Support DHCP Snooping Support DHCP Serve Support DHCP Relay |
| Management and Maintenance | Support Console/AUX Modem/Telnet/SSH2.0 CLI command line configuration Support WEB network management (HTTPS) Support FTP, TFTP, Xmodem, SFTP file download management Support SNMP V1/V2C/V3 Support one bond reduction Support NTP clock Support system work log Support Ping detection Support cable state detection Support CPU instant utilization status view Support link layer discovery protocol LLDP Support NMS intelligent management cente |
| System Requirements | Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later Cat5e or later Ethernet cable TCP/ IP, network adapter and network operating system (Microsoft Windows, Linux or Mac OS X) installed on every computer in the network |
| Model | Description |
| UF-MIES208GP-12 | L2+ Managed Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP Solar Power PoE Switch |
| SFP Options | SFP option. Please select your SFP on our SFP Options Page (Industrial SFP). |
| SFP module is to be purchased separately. | |
| Mounting Options | Default DIN-Rail Bracket installed; Wall Mount Bracket is included. |
| Power Options | 12~48VDC DIN-Rail Power Supply. Open Wire for Terminal Block. |
| Power Supply is to be purchased separately. |
){kind=link}