Industrial L2+ 16-Port 10/100/1000t 802.3at Poe + 2-Port 1g/2.5g SFP Managed Ethernet Switch, Managed Industrial 16g+2SFP Poe Switch

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: UF-MIS6216GP-SFP
• Transmission Rate: 10/100/1000Mbps
• Ports: 16
• Poe Port: 16-Port 10/100/1000t 802.3at Poe+
• Poe Power Budget: 480W
• Fiber Port: 2-Port 1000/2500base-X SFP
• Management: Layer 2 Management Function
• Transport Package: Carton Box
• Specification: Industrial Manged 16G+2SFP PoE Switch
• Trademark: UTP Fiber
• Origin: China
• HS Code: 8517622990
• Production Capacity: 1000pieces/Month
• Package Size: 10.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 2.500kg

Product Description

Product Description

Industrial L2+ 16-Port 10/100/1000T 802.3at PoE + 2-Port 1G/2.5G SFP Managed Ethernet Switch 

Overview
   The UTP UF-MIS6216GP-SFP is the highly reliable layer 2+ managed industrial PoE switch with 16-port 10/100/1000-T PoE and 2-port 1G/2.5GBase-X SFP slots. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. It supports ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. It also supports Layer 3 IPv4/IPv6 static routing features and powerful Layer 2 management and secure function, which all making them ideal for large-scale industrial networks.

    UF-MIS6216GP-SFP is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 44-57VDC, redundant power design with polarity reverse/over-voltage/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 80°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and crucial.


 

Detailed Photos

 

Application




Features

• 16*10/100/1000Base-T RJ45 PoE, 2*1G/2.5GBase-X SFP
• Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
• Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
• Support one digital output for relay alarm (terminal block Pin 5/6)
• Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
• Support Layer 2 management function
• Support G.8032 ERPS protocol, recovery time ≤20ms
• Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
• IP40 fan-less and Din-rail hardware design
• Operation temperature: -40 ºC ~+80ºC

Product Parameters

Specifications

Model No.		UF-MIS6216GP-SFP
Interface		Fiber ports	Copper RJ45 ports
		2	16
Ethernet		16*10/100/1000Base-T RJ45 PoE 2*1G/2.5GBase-X SFP
Management port		1*RJ45 Console port (115200,8,N,1)
Alarm port		One digital output for relay alarm, alarm relay current carry ability: 1A@24VDC
Standard		IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE802.3af PoE IEEE802.3at PoE+
LED Indicators
P (Power indicator)		Off: the device is power off or failed		On: the device power on is normal
S (System status indicator)		Blinking: device initialization		On: device on normal operation
1-16 (Copper ports indicators) Green		Off: ports link down
		On: ports link up
		Blinking: data on TX/RX
1-16 (PoE status indicators) Yellow		Off: PoE not working
		On: PoE working
17-18 (Fiber ports indicators) Green		Off: ports link down
		On: ports link up
		Blinking: data on TX/RX
Power parameter
Input voltage		44-57VDC(802.3af) 52-57VDC(802.3at) redundant power input
Input current		5.8A Max
Total power consumption		Full loading without PoE ≤15W PoE power budget ≤ 240W
Connector		Removable 6-pin terminal block, Pin 5-6 for relay alarm
Reverse polarity protection		Support
Over-voltage protection		Support
Over-current protection		Support
Layer 2 functions
Port aggregation		Support GE port aggregation Support 2.5GE aggregation Support static aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group
Port features		Support IEEE802.3x flow control, Support interface counters, Support port isolation, Port mirroring ( One-to-One, Many-to-One) Support loop detection(Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast)
Mac-address table management		Support static Mac-address management Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN
VLAN		Support access mode Support trunk mode Support hybrid mode
VLAN classification		Mac Based VLAN IP Based VLAN Protocol Based VLAN
GVRP		Normal mode Fixed mode Forbidden mode
QinQ		Port-based QinQ VLAN-based QinQ Flow-based QinQ
LLDP		LLDP (Link Layer Discovery Protocol)
Ring network protocol		Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP
		Support G.8032 ERPS protocol,single ring, sub Ring and major ring Recovery time ≤20ms
L2 Multicast
IGMP snooping	Support IGMP snooping
Group address	Support group address
Security functions
ACL		IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL
QoS		Support QoS Class, remarking Support SP, WRR queue scheduling Ingress port-based rate-limit Egress port-based rate-limit Support policy-based QoS
802.1x		Port access control Mac-address access control RADIUS server
Port-security		Port-security
IP source guard		IP Port/MAC binding
ARP-check		Support ARP-check and ARP packet filtering for illegal users
Access control		Support Telnet/SSH/HTTP/HTTPS user access control
Management & Maintenance functions
User Management		Support password protection Support user authorization management
SNMP		Supporting SNMP V1/V2C/V3 version
Web Management		Web Management Support HTTP V1.1 Support HTTPS
CLI management		Console/Telnet command line management
RMON		Support RMON(Remote Monitoring) alarm
Firmware upgrade		Firmware upgrade
Fault Detection		Ping/Tracerout Dying gasp Support optical transceiver DDM function
Cable detection		Support copper port cable detection
PoE management		Support 802.3af/802.3at
		Support PD watchdog
		Support PoE priority management
		Support Max PoE power configuration for each port
		Support alarm waterline configuration
		Support reserved power configuration
NTP		Network Time Protocol
Syslog/Debug		Syslog/Debug Syslog send to three servers
Configuration import/export		Support FTP/TFTP remote import/export
Dual partition management		Support dual partition switching
Application Protocol Functions
DHCP Snooping		DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82
DHCP client		Support DHCP client
Telnet server		Support telnet server
Telnet client		Support telnet client
SSH server		Support SSH server
TACACS		Support TACACS(the terminal access controller accesses the control system)
sflow		Support network traffic analysis
TFTP		Support TFTP Client
Layer 3 functions
ARP		ARP table aging
DHCP server
IPv4 / IPv6		static routing
Switching features
Switching capacity		42Gbps
Packet forwarding rate		62.5Mpps
MAC address table		16K
VLAN		4K
Buffer		12Mbit
Forwarding delay		<5us
Jumbo Frame		Support 10Kbytes
MDX/MIDX		Support
Watchdog		Support
Mechanical structure
Case protection		IP40
Installation method		Din-rail
Dimension(W*D*H)mm		54*115*158mm
Weight		1.55 kg
Operating environment
Operating temperature		-40ºC~+80ºC
Storage/transportation temperature		-40ºC~+85ºC
Relative humidity		Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH
Industrial Standard
EMS		Surge protection of power: IEC 61000-4-5  6KV/4KV(8/20us) Surge protection of Ethernet ports: IEC 61000-4-5  6KV/2KV(10/700us) RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m EFT:IEC 61000-4-4  4K/2K CS:IEC 61000-4-6 10V ESD:IEC 61000-4-2  Contact: 8K;Air: 15K
EMI		FCC Part 15B Class A
Shock		IEC 60068-2-27
Free fall		IEC 60068-2-32
Vibration		IEC 60068-2-6
Certification		CCC/CE/UKCA/RoHS/REACH/FCC
MTBF		>200,000 hours
Warranty		5 years

Ordering Information   

Model	Description
UF-MIS6216GP-SFP	L2+ Managed industrial PoE switch with 16*10/100/1000Base-T RJ45 PoE ports and 2*1G/2.5GBase-X SFP slots, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V input, redundant dual power supply, Din-rail installation. Operation temperature: -40ºC~+80ºC
SFP Options	SFP option. Please select your SFP on our SFP Options Page (Industrial SFP).
	SFP module is to be purchased separately.
Mounting Options	Default DIN-Rail Bracket installed.
Power Options	480W/5A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block.
	Power Supply is to be purchased separately.

Certifications

 

 

Packaging & Shipping

 

Company Profile

FAQ