Customization: | Available |
---|---|
Communication Mode: | Full-Duplex & Half-Duplex |
Type: | Ethernet Switch |
Still deciding? Get samples of US$ 139/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Industrial L2+ 2-Port 10/100/1000T 802.3bt PoE + 2-Port 10/100/1000T 802.3at PoE + 2-Port 1G/2.5G SFP Managed Ethernet Switch, 90 Watt PoE++ Industrial Switches
Model No. | UF-MIS6204GP90-SFP/ UF-MIS6204DGP90-SFP | ||
Interface | Fiber ports | Copper RJ45 ports | |
2 | 4 | ||
Ethernet | 4*10/100/1000Base-T RJ45 PoE/PoE+, 1-2 ports support PoE++ 2*1000/2500Base-X SFP |
||
Management port | 1*RJ45 Console port (115200,8,N,1),1*USB 2.0(optional) | ||
Data & Alarm channel (optional) | 1 channel RS485 1 channel DI (digital input) 1 channel DO (digital output) |
||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE802.3af PoE IEEE802.3at PoE+ IEEE802.3bt PoE++ |
||
LED Indicators | |||
P (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | |
S (System status indicator) | Blinking: device initialization | On: device on normal operation | |
USB (USB status indicator) Green | Off: USB flash drive not insert or not detected by device | ||
On: USB flash drive is detected by device | |||
Blinking: the device is reading and writing the data from USB flash drive | |||
ALM (Fault status indicator) Red | Off: Device on normal working state | On: Fault alarm | |
1-4 (Copper ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
1-4 (PoE status indicators) Yellow | Off: PoE not working | ||
On: PoE working | |||
5-6 (Fiber ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | 44-57VDC (802.3af) 52-57VDC (802.3at/802.3bt) redundant power input |
||
Input current | 3A Max | ||
Total power consumption | Full loading without PoE ≤8W PoE power budget ≤240W |
||
Connector | Removable 4-pin terminal block | ||
Reverse polarity protection | Support | ||
Over-voltage protection | Support | ||
Over-current protection | Support | ||
Layer 2 functions | |||
Port aggregation | Support GE port aggregation Support 2.5GE aggregation Support static aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group |
||
Port features | Support IEEE802.3x flow control, Support interface counters, Support port isolation, Port mirroring ( One-to-One, Many-to-One) Support loop detection(Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast) |
||
Mac-address table management |
Support static Mac-address management Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN |
||
VLAN | Support access mode Support trunk mode Support hybrid mode |
||
VLAN classification | Mac Based VLAN IP Based VLAN Protocol Based VLAN |
||
GVRP | Normal mode Fixed mode Forbidden mode |
||
QinQ | Port-based QinQ VLAN-based QinQ(VLAN-stacking; VLAN-mapping) Flow-based QinQ |
||
LLDP | LLDP (Link Layer Discovery Protocol) | ||
Ring network protocol | Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP |
||
Support G.8032 ERPS protocol,single ring, sub Ring and major ring Recovery time ≤20ms |
|||
L2 Multicast | |||
IGMP snooping | Support IGMP snooping | ||
Group address | Support group address | ||
Security functions | |||
ACL | IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL |
||
QoS | Support QoS Class, remarking Support SP, WRR queue scheduling Ingress port-based rate-limit Egress port-based rate-limit Support policy-based QoS |
||
802.1x | Port access control Mac-address access control RADIUS server |
||
Port-security | Port-security | ||
IP source guard | IP Port/MAC binding | ||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
Management & Maintenance functions | |||
User Management | Support password protection Support user authorization management |
||
SNMP | Supporting SNMP V1/V2C/V3 version | ||
Web Management | Web Management Support HTTP V1.1 Support HTTPS |
||
CLI management | Console/Telnet command line management | ||
RMON | Support RMON(Remote Monitoring) alarm | ||
Firmware upgrade | Firmware upgrade | ||
Fault Detection | Ping/Tracerout Dying gasp Support optical transceiver DDM function |
||
Cable detection | Support copper port cable detection | ||
PoE management | Support 802.3af/802.3at/802.3bt | ||
Support PD watchdog | |||
Support PoE priority management | |||
Support Max PoE power configuration for each port | |||
Support alarm waterline configuration | |||
Support reserved power configuration | |||
NTP | Network Time Protocol | ||
Syslog/Debug | Syslog/Debug Syslog send to three servers |
||
Configuration import/export | Support FTP/TFTP remote import/export Support USB import/export |
||
Dual partition management | Support dual partition switching | ||
Application Protocol Functions | |||
DHCP Snooping | DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 |
||
DHCP client | Support DHCP client | ||
Telnet server | Support telnet server | ||
Telnet client | Support telnet client | ||
SSH server | Support SSH server | ||
TACACS | Support TACACS(the terminal access controller accesses the control system) | ||
sflow | Support network traffic analysis | ||
TFTP | Support TFTP Client | ||
Layer 3 functions | |||
ARP | ARP table aging | ||
DHCP server | |||
IPv4 / IPv6 | static routing | ||
Switching features | |||
Switching capacity | 18Gbps | ||
Packet forwarding rate | 26.7Mpps | ||
MAC address table | 16K | ||
VLAN | 4K | ||
Buffer | 12Mbit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDX/MIDX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Case protection | IP40 | ||
Installation method | Din-rail | ||
Dimension(W*D*H)mm | 54*115*158mm | ||
Weight | UF-MIS6204GP90-SFP(1.15 kg); UF-MIS6204DGP90-SFP (1.25 kg) | ||
Operating environment | |||
Operating temperature | -40ºC~+80ºC | ||
Storage/transportation temperature | -40ºC~+85ºC | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
||
Industrial Standard | |||
EMS | Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us) Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m EFT:IEC 61000-4-4 4K/2K CS:IEC 61000-4-6 10V ESD:IEC 61000-4-2 Contact: 8K;Air: 15K |
||
EMI | FCC Part 15B Class A | ||
Shock | IEC 60068-2-27 | ||
Free fall | IEC 60068-2-32 | ||
Vibration | IEC 60068-2-6 | ||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | >200,000 hours | ||
Warranty | 5 years |
Model | Description |
UF-MIS6204GP90-SFP | L2+ Managed industrial PoE switch with 4*10/100/1000Base-T RJ45 PoE ports and 2*1000/2500Base-X SFP slots, complies with IEEE802.3af, IEEE802.3at, IEE802.3bt standard, DC44-57V input, redundant dual power supply, Din-rail installation. Operation temperature: -40ºC~+80ºC |
UF-MIS6204DGP90-SFP | L2+ Managed industrial PoE switch with 4*10/100/1000Base-T RJ45 PoE ports and 2*1000/2500Base-X SFP slots, complies with IEEE802.3af, IEEE802.3at, IEE802.3bt standard, supports DI/DO/RS485, DC44-57V input, redundant dual power supply, Din-rail installation; Operation temperature: -40ºC~+80ºC |
SFP Options | SFP option. Please select your SFP on our SFP Options Page (Industrial SFP). |
SFP module is to be purchased separately. | |
Mounting Options | Default DIN-Rail Bracket installed. |
Power Options | 240W/5A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block. |
Power Supply is to be purchased separately. |