Customization: | Available |
---|---|
Communication Mode: | Full-Duplex & Half-Duplex |
Type: | Ethernet Switch |
Still deciding? Get samples of $ !
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Hardware Specification | |
Standards: | IEEE802.3 10Base-T Ethernet |
IEEE802.3u 100Base-TX/FX Fast Ethernet | |
IEEE802.3ab 1000Base-T | |
IEEE 802.1d Spanning tree protocol | |
IEEE 802.1w Rapid Spanning tree protocol | |
IEEE 802.1s Multiple Spanning tree protocol | |
IEEE 802.1p Class of service | |
IEEE 802.1Q VLAN Tagging | |
IEEE 802.1AB-2005, LLDP | |
IEEE 802.1Qbb priority flow control | |
IEEE 802.3x Flow Control and Back pressure | |
IEEE802.3z 1000Base-SX/LX Gigabit Ethernet | |
IEEE802.3ae 10GBase-X | |
IEEE802.1ax Link Aggregation | |
IEEE802.1ak - Multiple Registration Protocol | |
10GBase-X SFP+ Slots: | 24 x 10GBase-X SFP+ interfaces, from port 1 to port 24 |
Combo Port: | 4 x 10/100/1000Base-T or 1000Base-X SFP |
Console Port: | 1 x RJ45-to-DB9 serial port (9600, 8, N, 1) |
OOB Management Port: | 1 x RJ45 |
Backplane Bandwidth: | 490Gbps |
Packet Forwarding Rate: | 364.56Mpps |
VLAN ID | 4K |
Flash Capacity | 32MB |
Memory Capacity | 1GB DDR3 SDRAM |
CPU: | PPC Dual-core 800MHz |
Packet Buffer | 9MB |
Jumbo Frames | 9216 bytes |
Transfer Mode | Support store-forward mode and cut-through mode |
IPv4/IPv6 Route | 6k/8k |
MAC Address Table | 128K |
Network Cables: | 10/100/1000BASE-T: 1G--Cat 5e/Cat 6/Cat 6A/ Cat 7 100M--Cat 5/Cat 5e/Cat 6/Cat 6A/ Cat 7 Cat 5/5e/6/6A/7 UTP cable (100 meters, max.) EIA/TIA-568 100-ohm STP (100 meters, max.) 1000BASE-X: 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 220/550m/2km 9/125μm single-mode fiber optic cable, up to 20/40/80/120km (vary on SFP module) 10GBASE-LR/SR/BX: 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 300m 9/125μm single-mode fiber optic cable, up to 20/40/80km (vary on SFP module) |
Management | |
System Management: | SNMP v1/v2/v3 Console Management TELNET Method WEB Interface |
Spanning Tree: | Support STP, RSTP, MSTP (802.1s) |
VLAN | Support port-based VLAN Support MAC based VLAN Support 802.1Q tag VLAN Support IP based VLAN |
Flow Control | Half-Duplex Is Based on Back Pressure Control Full Duplex Based on PAUSE Frame |
Storm Control | Broadcast Suppression Multicast Suppression DLF Inhibition Inhibition Rate |
Security Features | IP+MAC+PORT+VLAN Binding ARP Inspection DOS Protection Port Protection IP Source Port Protection |
VLAN | Port Based VLAN 802.1Q VLAN IP based VLAN MAC based VLAN |
MAC Address Table | Static MAC address table Dynamic MAC address table |
Port Mirroring | Support Port Mirroring |
Port Management | General Settings Port Statistics Configure Port Port Aggregation Port Isolation |
QoS | IEEE 802.1Qau Congestion Mechanism 8 Sending Queues Per Port Are Mapped To 8 Priority Levels of 802.1p |
IP Service | Ping Detection DHCP Detection |
Multicast Management | IGMP Snooping frame |
Remote Upgrade | Support for Version Upgrade via Web Support Local Version Upgrade |
Excellent Performance | ★ With 490Gbps backplane bandwidth, the industry's highest performance (1U TOR); ★ Hardware routing, wire-speed layer 3 switching packet forwarding rate reaches 364.56Mpps, L2/L3 full wire-speed forwarding; ★ It can be deployed in the core of the metropolitan area network provides several last 1km technologies |
Safe Reliable: | ★ Provide defenses such as DOS, distributed denial of service, deception, viruses ★ Support IEEE802.1x, provide port-based user authentication, network shield technology, security control technology policy control list ★ Limit the maximum number of hosts connected to the port, multi-channel binding of Ethernet interfaces to increase bandwidth system redundancy ★ Powerful ACL, supporting L2-L4 Layer Data Filtering ★ Strategy control list, flow adjustment |
Easy to Maintain: | ★ Support flexible port configuration ★ It can be managed through various methods such as Web, SNMP, CLI, Telnet, Etc. ★ Support XModem protocol, software upgrade BootRom Upgrade can be done through TFTP/ZMODEM ★ Support SFP+, but also backward compatible with XFP, Etc. ★ Enter or exit low power consumption state in PHY. |
Powerful Flow Broadcast Management Functions | ★ Automatically detect suppress broadcast storms, support IGMP message detection, effectively limit the flooding of broadcast messages ★ Support flow control in full-duplex mode half-duplex mode ★ Support the rate limit of the Ethernet Interface with 1M as the step length ★ Support IP Multicast QoS |
Environmental | |
Operating Temperature: | -10°C to 60°C (14°F to 140°F) |
Storage Temperature: | -40°C to 80°C (-40°F to 176°F) |
Relative Humidity: | 5% to 95% non-condensing |
Storage Humidity: | 5% to 95% non-condensing |
Electrical and Mechanical | |
Input Power: | 90-290VAC |
Power Consumption: | ≤110W |
LED Indicators | |
PWR: | Power Status |
SYS: | System Activity |
NC: | Connection/Receiving |
Dimensions (WxDxH): | 440 x 285 x 44mm |
Weight: | 5KG |
Casing: | Metal Case |
Mounting Options: | Rack Mount |
Regulatory Approvals | |
CE, RoHS, FCC |
Model | Description |
UF-FS24X4C | L3 Managed 24-Port 10G SFP+ + 4-Port Gigabit TP/SFP Optical Fiber Switch |
SFP+/SFP | 10GBase-X SFP+ or 1000Base-X SFP (to be purchased separately) Please select your SFP+ on our SFP Modules page for details. |
Mounting Options: | Rack Mount |
Power Options: | 90-290VAC |